Powdercoated frame
Steering bearing cups installed
Steering bearing cups installed
Inserting the shock bolts
Bud gives some advice "Don't hit your finger with the hammer"
Tapping the bots through the holes in the frame. A very tight fit.
Swing arm with bearings and seals installed waiting for the shock bolts to be installed.
Installing the shock bolts in the swing arm.
Installing the shock bolts in the swing arm.
Trying the swing arm axel for fit.
Installing the swing arm and its axel bolt.
The bolt goes home.
Prepping the shocks for installation.
Pressing the steel spacer out.
Pressing the steel spacer out.
Pulling the spacer free
Installing the shocks
Its starting to look like a motorcycle....
Swing arm, rear shocks and steering neck and tripple trees installed, its all temporary for now...
Time to spruce up the fork sliders, a little soft wire brushing to knock off the corrosion in preperation for buffing....
Just a few more places to brush....
Brushing completed on one...
After the first buffing
Still more to go but you can get an idea how they will look when completed.